140 mm x 175 mm x 18 mm skf 61828 bearing

Limiting speed:2000 r/min; Fatigue load limit Pu:220 kN; Reference speed:1300 r/min; r1,2 min.:5 mm; Basic static load rating C0:2450 kN; D:520 mm; Basic dynamic load rating C:1450 kN; s max.:6.5 mm; da max.:380 mm; F:385 mm;

G:Tr 600x6; A:8 mm; Hydraulic nut:HMV 120E; B:85 mm; B5:110 mm; Lock nut:HM 31/600; Mass adapter sleeve assembly:234 kg; d3:750 mm; d:600 mm; G3:13 mm;

r2 max.:1 mm; Lw:39.8 mm; r1,2 min.:0.3 mm; Dw:4 mm; Mass needle roller:3.93 g; r1 max.:0.8 mm;

Ba min.:12 mm; Da max.:445 mm; d1:280 mm; D:460 mm; Limiting speed:1500 r/min; Mass bearing + sleeve:91 kg; D1 ≈:417 mm; B2:42 mm; Fatigue load limit Pu:290 kN; da max.:376 mm;

d1:341.313 mm; Sleeve:S 3072x13.7/16; Locking plate:PL 72; d3 max.:419.227 mm; G:359.918 mm; B5:55.016 mm; Threads per inch:5; Lock nut:N 072; B1:192.253 mm; B:45.491 mm;

Weight:1220  ; Bearing designation:PLC 512-37  ; d:750 mm; Pu:1096.150 kg; Dynamic (Cr):6380 kN; B1:250 mm; Static (Cor):17230  ; B:360 mm; D:1000 mm;

End plug (suffix Y):EPR 23; Cap bolt recommended tightening torque:400 N·m; Pa:71.2 kN; Cap bolt:4 x 1-8 UNC; Labyrinth ring:2 x LOR 165; P150°:145 kN; Eye bolt:2 x 1/2-13 UNC; ba:90.487 mm; Appropriate attachment bolt size G:1.5 in; RG:1 NPT;

Max. speed for PosiTrac Plus seal:2350 r/min; Housing:SAF 615; L:349.25 mm; PosiTrac Plus contact element:2 x B10724-37; Pa:12.5 kN; RG:3/8 NPT; Adapter sleeve assembly:SNW 115x2.7/16; S:4.763 mm; Cap bolt recommended tightening torque:298.3 N·m; ba:44.45 mm;

Grease Speed Rating Open/Shielded n1:2400 rpm; Basic Static Radial Load Rating Co:104000 N; B:28.00 mm; Fillet Radius ra:2.00 mm; d:170.000 mm; D:230.0000 mm; Accessories:Two Shields; Sealed Speed Rating n3:1600 rpm; Oil Speed Rating Open/Shielded n2:3000 rpm; Basic Dynamic Radial Load Rating C:9360

Cap bolt:4 x 3/4-10 UNC; Ca:95.809 mm; A1:171.45 mm; Da:309.999 mm; Eye bolt:2 x 3/8-16 UNC; J1:107.95 mm; End plug (suffix Y):EPR 18; PG:1/4 NPT; R1:115.888 mm; Mass pillow block:125 kg;

B:86 mm; d1 ≈:229.3 mm; ra max.:3 mm; Calculation factor kr:0.16; da min.:197 mm; s max.:4.2 mm; r1,2 min.:4 mm; Fatigue load limit Pu:166 kN; Mass bearing:30 kg; Da max.:302.2 mm;

da:17 min; Dynamic (Cr):5.594 kN; Static (Cor):2.865 kN; d:15 mm; Oil:25 000 min-1; Da:30 max; B:9 mm; Weight:0.03 kg; Grease:21 000 min-1; D:32 mm;

C1 max.:24 mm; α:7 °; l7 min.:46 mm; r1 min.:0.6 mm; d2 max.:94 mm; Mass rod end:2.11 kg; Material constant KM:330; G:M 42x3; B:28 mm; h:145 mm;

da max.:175 mm; Angle ring:HJ 328 EC; ra max.:3 mm; da min.:157 mm; Da max.:282.5 mm; B:62 mm; D:300 mm; Limiting value e:0.2; r1,2 min.:4 mm; D1 ≈:250.6 mm;

d1:67 mm; B3:3 mm; Mass lock nut:0.21 kg; G:M 55x2; B:14 mm; d3:75 mm; Associated spanner:HN 10-11; Grub (set) screw size:M6; h:3 mm; Recommended grub screw tightening torque:8 N·m;